PROJ-FILE-FMT=2
PROJ-DRIVER-NAME='Sharp PN-E603 (Rev A).prjdrv'
PROJ-NAME='Sharp PN-E603'
PROJ-DRIVER-REV='Rev A'

IR-TIME-0L=750u
IR-TIME-0H=250u
IR-TIME-1L=1.8m
IR-TIME-1H=250u

PROJ-BAUD-RATE=38400,8,N,1

IRCODE['_REPEAT']=""
IRCODE['_PREFIX']=""
IRCODE['_SUFFIX']=""

DOC-INSTALLATION-NOTE[1]="This screen WILL NOT RESPOND to RS232 control unless you set RS-232C/LAN SELECT setting in TV's menu to RS-232C. Also, the TV may receive data on PIN 3 of the RS-232 port (manual is unclear, but this was the case for at least one user with this TV."

; power
RSCODE['POWER ON']="'POWR   1',$0D",REPEATS=1
RSCODE['POWER OFF']="'POWR   0',$0D",REPEATS=1 
RSCODE['POWER POLL']="'POWR????',$0D",REPEATS=1
POWER-POLL-INTERVAL=10s
POWER-POLL-TIMEOUT=1s
POWER-POLL-THRESHOLD=5
POWER-POLL-STARTBYTE=5
POWER-POLL-MATCH-ANY=False
POWER-POLL-MATCH-BYTES="'1'"
POWER-POLL-TESTBYTE-MASK=255
POWER-POLL-DURING-WARMUP=False
POWER-POLL-DURING-LOCKOUT=True
POWER-POLL-LOCKOUT=10s

; volume
RSCODE['VOLUME']="'VOLM  ',&VASC2,$0D"
PROJ-USES-ABSOLUTE-VOL=True
VOL-MUTE=0
VOL-RANGE=31
VOL-FLOOR=0

; selection

RSCODE['DVI']="'INPS   1',$0D",REPEATS=1,IS-SELECTION
RSCODE['RGB']="'INPS   2',$0D",REPEATS=1,IS-SELECTION
RSCODE['COMPONENT']="'INPS   3',$0D",REPEATS=1,IS-SELECTION
RSCODE['VIDEO']="'INPS   4',$0D",REPEATS=1,IS-SELECTION
RSCODE['HDMI 1 (AV)']="'INPS   9',$0D",REPEATS=1,IS-SELECTION
RSCODE['HDMI 1 (PC)']="'INPS  10',$0D",REPEATS=1,IS-SELECTION
RSCODE['HDMI 2 (AV)']="'INPS  12',$0D",REPEATS=1,IS-SELECTION
RSCODE['HDMI 2 (PC)']="'INPS  13',$0D",REPEATS=1,IS-SELECTION
RSCODE['DISPLAYPORT']="'INPS  14',$0D",REPEATS=1,IS-SELECTION

; hidden 
RSCODE['MUTE ON']="'MUTE   1',$0D",REPEATS=1,IS-HIDDEN
RSCODE['MUTE OFF']="'MUTE   0',$0D",REPEATS=1,IS-HIDDEN
RSCODE['CHANNEL UP']="'CHUP   1',$0D",REPEATS=1,IS-HIDDEN
RSCODE['CHANNEL DN']="'CHDN   1',$0D",REPEATS=1,IS-HIDDEN

BYTES-TO-QUEUE=2
IO-DOWNTIME=290m
WARM-UP-DELAY=10s
POWER-ON-DELAY=5s
IO-CANCEL-DOWNTIME-ON-RX=False
USE-MODULATION-WHEN-WIRED=False
INVERT-LINE-WHEN-WIRED=True
CARRIER-PERIOD=26.4u
CARRIER-DUTY-CYCLE=50
PROJ-MISSING-THRESHOLD=5

DEFAULT-CORE-FUNCT[REPEAT]='_REPEAT'
DEFAULT-CORE-FUNCT[PREFIX]='_PREFIX'
DEFAULT-CORE-FUNCT[SUFFIX]='_SUFFIX'
DEFAULT-CORE-FUNCT[POLL]='POWER POLL'
DEFAULT-CORE-FUNCT[ON]='POWER ON'
DEFAULT-CORE-FUNCT[OFF]='POWER OFF'
DEFAULT-CORE-FUNCT[VUP]='VOLUME'
DEFAULT-CORE-FUNCT[VDN]='VOLUME'
DEFAULT-SELECTION[1]='HDMI 1 (AV)'
DEFAULT-SELECTION[2]='DVI'
DEFAULT-SELECTION[3]='RGB'
DEFAULT-SELECTION[4]='COMPONENT'
DEFAULT-HID-FUNCT[OFF]=''
DEFAULT-HID-FUNCT[VUP]=''
DEFAULT-HID-FUNCT[VDN]=''
DEFAULT-HID-FUNCT[1]=''
DEFAULT-HID-FUNCT[2]=''
DEFAULT-HID-FUNCT[3]=''
DEFAULT-HID-FUNCT[4]=''
DEFAULT-LOCKOUT=5s

POWER-SENSE-OPTIONS=None,Sensor
IR-WIRING-OPTIONS=IR-Emitter
PASSIVE-MODE=False